One Failed $80 Part Messed up EVERYTHING on my Audi. I Fixed it ALL Without the Dealers Help...

Publicerades den 15 nov 2020
Get the best discount of the year on Raycons! Now through the end of November, go to buyraycon.com/samcrac to get 20% off your order!
I order all my Audi, BMW, Mercedes and European Repair parts from: fcpeuro.com
This Junk $3,000 Audi TT came with a broken engine mount that took out multiple parts because it was left neglected. We fix all of its mounts and brackets and then upgrade the suspension with a coilover setup from @FCP Euro
Instagram: samcracc
Email Me: SamcracAuto@gmail.com

Kommentarer

  • Being an ex vw guy who rebuilt his vr6, watching what parts you put in your car makes me cringe

  • If you will use Gibbs has the penetrating oil, and let it sit overnight or even a day or two. And keep it soaked it will get into those folks better than almost anything I've ever seen. It will soak into a millionth of an inch. Not only that you can actually spray it on something and wipe the item down and paint it without cleaning it off and the paint will adhere to the item. I've seen it used for bringing under hood engines back to looking like Nearly New. I used it on one vehicle tour almost 200,000 miles and if you clean off the engine it literally looked like it was less than 3 months old. It's a great product. Do not oh, do not, do not, forget to put anti seize on the bolts that you put back into that stupid bracket. If you had drilled that out and put a helicoil in it with some Loctite you could have still saved the old bracket. I don't know what you were using to try and keep that up with but it should have been an oxy-acetylene, not a propane torch. Propane will not get it warm enough quick enough to cause it to break loose from the bolt. Furthermore I'd like to give you the difference between an Audi, especially a TT, or an R8 or R-10, and a porcupine. A porcupine has its Pricks on the outside!

  • Please tell me you aren't removing things with the torque wrench? Ughhhhhhhhhhhhh

  • Silver TT roadster is a 1.8 you can tell by the single exhaust which means it's not a Quattro either.

  • Hit a deer recently. Same mount exploded in my engine bay. Wasted a lot of time looking for oil leaks then found it. The fluid in it had me wishing a polyurethane unit was in production. Oh well. Mush on with the soft oem one I go

  • Another day at the Ranchette with Sam...

  • Love fcp euro I always use them

  • so next time just weld the mount to the bracket on the broke side

  • The TT is NOT quatro drive, Never was. It is all wheel, well kind of.

  • You should always support parts when putting in bolts that support weight it is a VERY BAD IDEA to use the bolt to lift parts as you tighten them

  • rumour has it sam has more cars than cows now

  • only 30% subscribe because you never seem to finish anything!..people want to see the end of the story..."The car was broken, this is what I did to fix it, Let's take for a drive!" ..People need the conclusion of the matter...your welcome. And your VERY wordy ...get on with it!!

  • Use "Hagel's brew" (50% acetone / 50% atf) to loosen rusted bolts. This is a trick used by big rig/farm equipment mechanics.

  • Tap & Die that bolt!

  • WHAT year is this TT?

  • Your car was broken the day it rolled off the assembly line. Garbage over priced volksvagen

  • I could easily name many 6 pots' which sound a whole lot better than the R32. Before, during or after the R32's time. And I mean that engine in any car it was in. And I've seen few things as dodgy as welding in an engine bay!

  • that was a studburn job

  • 👍

  • 1.7 million subscribers, paid subscriptions, no lift, working on grass an aversion to spending money on a engine bracket...BUT $1100 coilovers !!! come on

  • to remove 'clamp' style strut to knuckle. to make removal easier drive a wedge into the slot of the knuckle (like a chisel) that will spread the knuckle mount slightly

  • what kind of fucktard uses a pipe on a ratchet????????????

  • I like this rebuild project Sam

  • Man I like yr programmes but please listen to me. You need to take this tip. You rattle on too much. Its exhasting and really detracts from the great content. Listen to prophesional presenters. And editirs. Pausing breathing over emphasising. Just relax a bit pause breath. Dont run yr sentences and words into each other. Otherwise its good.

  • Do you guys have "Euro Car Parts co"in the US?

  • You should have jacked the engine up on various points to release any weight forced onto the broken bolt...

  • I'm surprised you didn't just replace the bushing(s) in the lower engine mount with a poly bushing. Would have been a lot cheaper than replacing the whole thing. Everything else I would have done the same though!

  • These videos are getting hard to watch, because he spends more time advertising for the parts site than doing anything else...

  • TT is a you know what in tagalog So at 1:21 it doesnt sound very great

    • Like Garfield the cat's teddy bear pookie....

  • It's funny how the sponsor segment was the thumbnail preview for this video rofl

  • Jack on a dirt. Why would you do that?

  • Nice Work on this Audi TT 👍🏻

  • I've wondered about safety concerns with welding so close to engines......any fuel lines with even the slightest amount of leakage and BOOM?

  • When these cars go right, they really go right - & you can tell in Sam's voice. Compared to the hard time that Range Rover gave him, this TT has him sounding positively giddy - way to go, Sam!

  • Bilstein, say it, Bilstein, Bilstien.

  • I think you need to lower it more

  • couldnt you get a bracket from the breakers yard sam

  • Them tyres are dozed too scrap

  • Stop advertising those earpods they are the worst

  • Do you need a dealer's license to buy these cars at auction?

  • Easy out tool and a drill for broken bolts, broken off flush.

  • Video is very nice😍

  • Whatever happened to his Nissan Figaro?

  • Where’s new video

  • I bet those are Bilstein Coilover.

  • Nice Bilstein PSS10’s it came with

  • always been an anti-audi guy but watching these videos of the TT makes me want to slap a diesel BMW engine in one :O

  • still waiting on the TT update!

  • Could have taken the bracket to a machine shop and had that drilled out, no? Cheaper than the new bracket...

  • I love these mk1 TT s cheap, fun, well made ,

  • Hi Sam could you put a link in for that tool used to spread the bottom of the shocker please

  • 👍👍✌️

  • Uprated Rear anti roll bar is important on these cars to make them handle better

  • VAG COM hardware are mostly single use stretch bolts.

  • What’s up with the Ferrari

  • SamCrac Commercials

  • was nut you were trying to weld galvanized?

  • 2004 MERCEDES-BENZ E-CLASS 5.0L Stock#: 28947298 VIN: WDBUF70J34A****** Sam you think this is a good buy and how much do you think this would sell for?

  • I like that you never give up on actually making money on the cars no matter how hard the job. you do good work, congratulations on 1 million subs, do you think you will do giveaways?

  • Such a shame you don't invest in a Bendpak car lift .

  • Why the bolt hole on that bracket is oval and not fitted with the bolt?is that adjustable? thats why the bolt snap because of that space that should have no movement because thats the rubber is for..german engineering.

  • Excellent build!

  • 🤩🤩🤩

  • My 2019 Callaway Tahoe SC560 is about to go up on Copart in CT. 560hp 6.2L...totaled it 3 weeks ago! Its going to be a sweet rebuild for someone!

  • I would recommend you to mount S-line 225 40 R16 Wheels

  • 16:18 Yeah, that's not bad for a glorified beetle

  • I was subscribed, but when you started wasting time on super expensive cars, half-assing stuff, and not finishing any projects, I unsubscribed. This was a good video, and the work was actually done right.

  • L O W E R

  • I've watched Sam for about two years and only just realised I'm not subscribed :|

  • The world is about to end JESUS CHRIST is coming repent be ready for the Rapture JESUS CHRIST is the only way to HEAVEN and to escape from going going to HELL 6 Jesus said unto him, I am [a]that Way, and that Truth, and that Life. No man cometh unto the Father, but by me. John 14:6 1599 Geneva Bible (GNV) 16 [a]For God so loveth the world, that he hath given his only begotten Son, that whosoever believeth [b]in him, should not perish, but have everlasting life. John 3:16 1599 Geneva Bible (GNV) 18 And am alive, but I was dead: and behold, I am alive for evermore, Amen: and I have the keys of hell and of death. Revelation 1:18 1599 Geneva Bible (GNV) JESUS CHRIST IS coming soon repent follow JESUS CHRIST become a baptized Holy Spirit converted filled born again Christian ready for the Rapture...Pray read the Holy Bible in Revelation shows we are living in end of the world times...Seek JESUS instructions to be ready for the Rapture JESUS return... Also share JESUS CHRIST IS the only way to HEAVEN and to escape from going to HELL...Share JESUS death and resurrection to save our souls from going to Hell with all and share the Holy Gospel of JESUS with all 🙏

  • Wait till you see how much the dsg fluid costs per quart.

  • How are you gonna show us the stock ride height while on jerks 😂

  • Great video Sam

    • Glad you enjoyed it

  • nice mustang

  • CAN YOU MAKE A GAARGE TOUR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! PLZZZ

  • dude im not buying those trashy ear wax collectors

  • I would bet on the nut not welding to the bolt due to the bolt being aluminium

  • Lol clickbait title... I was expecting turbo... how does this make it keep it up with R8?. And I’m a regular viewer

  • Stuck bolts , left hand drills work a treat can get lucky if they bite they un do the bolt 👌🏻

  • i can say firsthand as the Audi R8 is my favorite car ever that it is much better spec-wise and in beauty than the TT in virtually every metric. but for that price, you might have a bargain bin surprise on your hands!

  • You should do a updated video on how to buy your own car and fix it.

  • it's sad we doesn't have a platform like fcp euro in Denmark :/

  • You paid $3k for a used Audi? BIG SPENDER $900 TOPS

  • Brought back memories of doing the cambelt on my TT, and having to remove that bracket. They were not good memories...

  • Samdoingcrack

  • Half video talking about coilovers but only two of them are

  • Tune the audi r8

  • Unfortunately febi parts are consired ”chinaparts” here in Europe I’m afraid.

  • didnt u say before lamborghini murcielago was ur fav car of all time?

  • I can’t believe your jacks are safe in a field. Why don’t you work on firmer ground. I enjoyed the video again.

  • adam stanler LOOOL

  • I own both cars, v8 r8 and the 1.8t 225 tt, the tt is tuned to only around 350bhp but its so much more fun than the r8, it feels small and wants to be driven hard and fast, I feel the r8 doesn't like being smashed through the gears full pelt

  • "Audi's best tt" i hope you're talking just the mk1 because the tt rs would like a very angry 5cyl turbo word with you 🤣

  • Have you got a clip on just you, where you live, the farm, family etc???? Your like the guy next door!! I’d like you as my neighbour!!! Rob Devon UK

  • Love the editing!! No long vids on fitting parts. To the point!! Like it!!

  • Does it come natural acting like an idiot

  • Just take the part to an edm shop and have them burn the bolt out

  • project farm on youtube has a good video on what the best extractor is and this is by putting them through a very thorough torture-test

  • U need a lift

  • did you get an alignment after height adjustment?