I Found an Mustang GT ABANDONED in a field and Bought it for $500! Will it Run???

Publicerades den 15 mar 2021
Go to NordVPN.com/samcrac or use code "samcrac" to get a 2-year plan plus 1 additional month with a huge discount.
I found this 5 Speed Manual 1999 Mustang GT New Edge on a classified online that's been sitting in the same place for years. I bought it, and had it towed home and tried to start it.....
Special thanks to Step Mom: bit.ly/3lOlePt​
This is the Scope Camera I used: amzn.to/3n1w4mF​
Instagram: samcracc
Email Me: SamcracAuto@gmail.com

Kommentarer

  • step mom stuff is getting old tbh. was funny at first but i mean really c'mon. it's old now.

  • In Australia our starting fluid is called start ya bastard.

  • Ahhhhhahahahha....fraudci!

  • Sam. Do you have a site that I could get wiring diagrams for BMWs?!? Need help. I know you mentioned it before in one of your videos!!

  • Dirt dobber nests

  • Are those fire ants? Why not use scan tool and look for codes?

  • Get rid at Aution. Go for profit 😀

  • That’s the longest dipstick I have ever seen!

  • Sam my bro... Mom is the best 😍😍😍😍😍😍

  • I miss the explanation but how did you get “stepmom” to join in the videos?

  • What's up with the Fauci reference? If you've got something to say, why not come out and say it instead of the 'flash card' comment?

  • lmao am i only one that thought it was sus when he showed his "stepmom" in a bikini.. like wut lol

  • Just fix a decent car to give step mom a new daily - make her proud!

  • Is it just me who thinks he looks sort of like Adam Sandler???

  • WASP NEST! damnit

  • Problems with the spark plug threads are a known issue with the modular Ford engines and the is an aftermarket Helicoil that you can buy to repair the issue. I don't know it will work but you can try releasing one motor mount and tilt that bank up to work on it.

    • HeliCoil 5396-14 Sav-A-Thread HT - Ford 5.4 and 4.6 Liter Spark Plug Thread Repair. If the threads are damaged it is because a mechanic got sloppy, and Ford cast that part of the head too thin so there were not that many threads in the first place. There is also plan B and buy a new head for it. The 4.6L is dirt common.

  • 2JZ swap it lol

  • Swap tge engine for a newwwer model engine

  • I think the ants killed the battery

  • Replace the Cylinder head then send it to the auction. Why make $1200 when you can make $2500. I mean, it's not an I8 afterall.

  • No comments on the braided line with the line that's capped off? Either oil supply line for turbo/ super charger or for nitrous.

  • Why is Corey driving a Crown Vic?? Is she playing good cop bad cop or hide the night stick???

  • Open the cylinder head and free the stuck valve and you got yourself a good running matching numbers mustang gt

  • Sam will always prefer a repair video on an american car than european vehicles that are over priced. Snob europeans who think there better than us. And their cars are garbage . Over engineered no reliability.

    • But they know the difference between there and they’re.

  • I’d just replace the one valve. Just check to make sure everything is straight and do both head gaskets.

  • Fix the mustang! Idc about german cars haha

  • FIX IT!!!

  • repair the mustang

  • Sam the idol air control valve is missing off the intake

  • Sam it won't stay running with the intake boot off you totally took the mass air flow away. Duh 🙄

  • Is his step mom corey chase?!?

  • And it's 4 things not 3 Fuel Air Spark And compression

  • Whats with the weird step mum shyt? Pervy guy for sure

  • I would change all the cylinder heads on the mustang!

  • I’ve seen these go for over 20k

  • Put in new cylinder head. Just did this on '90 Bronco II V6. New head with valves $250, plus head gasket and head bolts.

  • Those are fucking wasps nests Sam, Jesus Christ, and you live in FL?

  • Those aren't ants nests.

  • Your helpers right. they are wasp nests.

  • WTF...it didn't run on 7 cylinders! One bent valve won't keep an 8 front running. Run away.

  • You need a winch on that trailer, then you don't need a tow.

  • Sam, I'll buy the mustang right now. Hit me back. Not joking. This is the only way I have to get a hold of you.

  • 1:32 Funny How you put a Picture of a Man who Helped Save Countless Lives! Instead of a Picture of The Orange Fascist Tyrant who's whole purpose was satisfying his Own Interests & who's Racism, Greed & Self Interest Caused the Lives of over 400K AMERICAN LIVES!! Makes sense that a Ugly Ass Florida Guy like Samcrac who Probably Never had Girls his whole life But seen all the Hispanic and Black Guys with Girls is a Republikkkan !!

  • Pull the intake then pull the head. Replace the rocker arm and the valve an let it run.

  • You should always try and unplug the mass airflow sensor

  • Yo step mom look Familiar

  • LS swap it

  • Sam!!!! Are you an anti masker?!!! 😱

    • No I wear my mask in public

  • Sam help step mom!! 😢

  • "It sounded good" what? NO, it didn't. LOL

  • Stop showing your immodest step mom please. It ruins your channel.

  • The Bad Landrover pixies have jumped from the battery to the Mustang. Good luck sir! ;-)

  • 8:30 Mud wasp nests keep exploding in the belts and pulleys. Nature's fireworks.

  • Idk if it’s just that one valve causing that issue it sounds like it barely wants to run with just one cylinder down i killed my 4.6 with nitrous an had 3 melted plugs an it started an ran smoother than this one it could have bad or clogged injectors

  • Rebuild the engine, do the labor yourself and she’ll be good years to come and keeping costs on a budget

  • Cory chase... I'll be damned ..

  • Just replace the bent valve and sell it it's a no brainer

  • That car definitely had a procharger or vortec at some point. The capped off oil feed line and the upper radiator hose are a dead giveaway.

  • Just replace the valve and gasket on both sides ?😀

  • Sam is reallly taking this step mom situation seriously

  • Fix it plz

  • Fix the Mustang, Man!

  • Just rebuild it. Show us you can do it yourself.

  • Backyard fix, just pull the bad valve and lap a new one in if the head looks good otherwise. Fresh timing guides/tensioners while you're in there and done for a couple hundred. One video for the fix, another video for a full inside/out detail and then dump it for $4k.

  • I'd rather see you restore a Mustang then work on another POS Ferrari.

  • Your videos are going downhill

  • She is Beautiful in this color, it just need some good treatment and it will be an amazing cheap daily driver, for a Ford lover like me. I would buy it if I was in your country

  • You know Cory Chase?!?!?!

  • Save it!!!!! Try a head replacement

  • Is his “step mom” that one pxrn star or is it just me

  • Fix it 👌👍

  • YOU CAN'T say Stepmom anymore! I've watched too much yellow youtube. The word Stepmom is reserved for other storylines now. ... 1:15 oh wait... storyline checks out so far. awwwh mahn...

  • lol change the head and hot it up a bit

  • Fix it Sam. That’s what we would do if we had the Mustang. I’ve done the heads on a Taurus V6 and that’s probably harder than this because it’s transverse. Show us what a man you are!

  • Hey Sam! Just pull that head off and put a valve in it. You could have a machine shop run through the head, but if you want on the cheap, pull bent valve, analyze seat and lap a new valve in.

  • I'd fix it that car has potential my cousins 03 2 valve runs really good he put longtubes on it a cold air intake and a lightweight flywheel that car hauls ass lol.

  • What's that line on top of the alternator for? I've seen a few of this era mustangs and I've never seen one with that line there before. 12:08 is a good view of it.

  • Where does he buy his cars???

  • Bruh I hear Kermit the frog at 12:23

  • Maybe uncle Rich has a tesla engine you could throw in that bad boy.

  • You need to figure why did the piston kiss the valve, most likely a bottom end issue...replace the whole engine...And these r far from the least desirable mustang, actually one of the more desirable body styles just need a few mods for the power otherwise a really fun car...

    • Exactly! The 2001 Bullitt, along with the 2003/2004 Mach 1's and Terminators are already very valuable. Even the 99-04 V6's aren't cheap anymore, atleast if you want a good one.

  • Get Mustie in. He'll get it running.

  • She is beautiful 🌹

  • I'd see what's out there for engines and probably swap it. If you can't find something with some lower mileage then replace both heads.

  • It's a Ford. Lost cause.

  • Make it a reliable cheap daily for I'd say 1000 - 1500 usd, maybe a small upgrade here & there that's really common and basic that lifts up the performance a bit too make it a bit nicer too drive perhaps it's kind of like the audi tt suspension wise bit too much on comfort even if the car is a bit gutless for a v8 that can become the next owners upgrade instead while you make it drive nicely for stock power figures with 15 - 20 years of use. Front, rear sway bars perhaps with lowering springs & emissions safe exhaust upgrade that at the same time gives it a bit more of an exhaust note + a bit better pair of heads for the motor too breathe with will do great on this, its fords first independent rear suspension as well i believe on their mustang platform so worth spending a bit of time refining that on the cheap. New belts ofc as well while you are at it, easy too do while you are under the hood & a job the new owner would appreciate not having too do even as a daily driver if they decide too throw a vinyl wrap onto the car it will look great while being cheap or if you perhaps do that. Check over suspension bushings & joints, air up tires & take it for a spin once you would say it clears a safety check making sure everything works as it should, brakes, brake pads is in good condition and has good response, maybe make it a kind of a beginners track car or autocross car. They are alright for that kind of stuff, mostly suspension, tires while making sure the engine is healthy & reliable at high rpms, this might have suffered valve float from neglect before the previous owner bought & parked it from a lack of maintenance in the heads. There are lots of cheap mods for a bit extra power for the 2 valve 20 - 30 whp isnt uncommon, all over youtube mostly as well so worth taking a look at something in that direction.

  • Did check trunk for the nitrous bottle?

  • I like the more Square more beefy muscle cars I don't like the rounded ones

  • I wanna buy it!

  • Fix the car, put after market exhaust in it, put on better looking headlights, maybe a cold air intake, have the paint buffed, then sell it at auction

  • try to hit the bent valve with a hammer or only change the bad valve it is a very easy fix especially with a hammer!

  • Rotary swap

  • Fix it or is worth it

  • I would love to give step mom a tune up 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

  • Replace the heads and get the paint strait. Make a bundle off it.

  • Chrisfix car in blue version haha

  • Rebuild refresh give away....(monetary eneter a chance to win wethr by buyin merch)

  • I like this body style of Mustangs

  • Put a tfs top end kit and it’ll be fixed and 400 hp strong.

  • Mach 1 shift knob always looks great.